ටයිටේනියම් ඩයොක්සයිඩ්

විකිපීඩියා වෙතින්

සැකිල්ල:Chembox new

Titanium dioxide, also known as titanium(IV) oxide or titania, is the naturally occurring oxide of titanium, chemical formula TiO2. When used as a pigment, it is called titanium white, Pigment White 6, or CI 77891. It is noteworthy for its wide range of applications, from paint to sunscreen to food colouring when it is given the E number E171.


Titanium dioxide occurs in nature as the well-known naturally occurring minerals rutile, anatase and brookite, additionally two high pressure forms, the monoclinic baddeleyite form and the orthorhombic α-PbO2 form have been found at the Ries crater in Bavaria. [1][2] The most common form is rutile[3], which is also the most stable form. Anatase and brookite both convert to rutile upon heating.[3] Rutile, anatase and brookite all contain six coordinate titanium. Additionally there are three metastable forms produced synthetically and five high pressure forms:

Form Crystal system Synthesis
rutile tetragonal
anatase tetragonal
brookite orthorhombic
TiO2(B)[4] monoclinic Hydrolysis of K2Ti4O9 followed by heating
TiO2(H), hollandite form [5] tetragonal Oxidation of the related potassium titanate bronze, K0.25TiO2
TiO2(R), ramsdellite form [6] orthorhombic Oxidation of the related lithium titanate bronze Li0.5TiO2
TiO2(II)-(α-PbO2 form) [7] orthorhombic
baddeleyite form, (7 coordinate Ti)[8] monoclinic
TiO2 -OI[9] orthorhombic
cubic form [10] cubic
TiO2 -OII, cotunnite, PbCl2[11] orthorhombic

The naturally occurring oxides can be mined and serve as a source for commercial titanium. The metal can also be mined from other minerals such as ilmenite or leucoxene ores, or one of the purest forms, rutile beach sand. Star sapphires and rubies get their asterism from rutile impurities present in them.[12]

Spectral lines from titanium oxide are prominent in class M stars, which are cool enough to allow molecules of this chemical to form. Titanium Dioxide can be found in most of the leading skin/face products.


Crude titanium dioxide is purified via titanium tetrachloride in the chloride process. In this process, the crude ore (containing at least 90% TiO2) is reduced with carbon, oxidized with chlorine to give titanium tetrachloride. This titanium tetrachloride is distilled, and re-oxidized with oxygen to give pure titanium dioxide.[13]

Another widely used process utilizes ilmenite as the titanium dioxide source, which is digested in sulfuric acid. The by-product iron(II) sulfate is crystallized and filtered-off to yield only the titanium salt in the digestion solution, which is processed further to give pure titanium dioxide. Another method for upgrading ilmenite is called the Becher Process.


Titanium dioxide is the most widely used white pigment because of its brightness and very high refractive index (n=2.7), in which it is surpassed only by a few other materials. Approximately 4 million tons of pigmentary TiO2 are consumed annually worldwide. When deposited as a thin film, its refractive index and colour make it an excellent reflective optical coating for dielectric mirrors and some gemstones, for example "mystic fire topaz". TiO2 is also an effective opacifier in powder form, where it is employed as a pigment to provide whiteness and opacity to products such as paints, coatings, plastics, papers, inks, foods, medicines (i.e. pills and tablets) as well as most toothpastes. Opacity is improved by optimal sizing of the titanium dioxide particles.

Used as a white food colouring, it has E number E171. Titanium dioxide is often used to whiten skim milk; this has been shown statistically to increase skim milk's palatability.[14]

In cosmetic and skin care products, titanium dioxide is used both as a pigment and a thickener. It is also used as a tattoo pigment and styptic pencils.

This pigment is used extensively in plastics and other applications for its UV resistant properties where it acts as a UV absorber, efficiently transforming destructive UV light energy into heat.

In ceramic glazes titanium dioxide acts as an opacifier and seeds crystal formation.

In almost every sunscreen with a physical blocker, titanium dioxide is found because of its high refractive index, its strong UV light absorbing capabilities and its resistance to discolouration under ultraviolet light. This advantage enhances its stability and ability to protect the skin from ultraviolet light. Sunscreens designed for infants or people with sensitive skin are often based on titanium dioxide and/or zinc oxide, as these mineral UV blockers are less likely to cause skin irritation than chemical UV absorber ingredients, such as avobenzone.

Titanium oxide is also used as a semiconductor.[15]

As a photocatalyst[සංස්කරණය]

Titanium dioxide, particularly in the anatase form, is a photocatalyst under ultraviolet light. Recently it has been found that titanium dioxide, when spiked with nitrogen ions, or doped with metal oxide like tungsten trioxide, is also a photocatalyst under visible and UV light. The strong oxidative potential of the positive holes oxidizes water to create hydroxyl radicals. It can also oxidize oxygen or organic materials directly. Titanium dioxide is thus added to paints, cements, windows, tiles, or other products for sterilizing, deodorizing and anti-fouling properties and is also used as a hydrolysis catalyst. It is also used in the Graetzel cell, a type of chemical solar cell.

The photocatalytic properties of titanium dioxide were discovered by Akira Fujishima in 1972 [16]. The process on the surface of the titanium dioxide was called the Honda-Fujishima effect [17].

Titanium dioxide has potential for use in energy production: as a photocatalyst, it can

  1. carry out hydrolysis; i.e., break water into hydrogen and oxygen. Were the hydrogen collected, it could be used as a fuel. The efficiency of this process can be greatly improved by doping the oxide with carbon, as described in "Carbon-doped titanium dioxide is an effective photocatalyst" [18].
  2. produce electricity when in nanoparticle form. Research suggests that by using these nanoparticles to form the pixels of a screen, they generate electricity when transparent and under the influence of light. If subjected to electricity on the other hand, the nanoparticles blacken, forming the basic characteristics of a LCD screen. According to creator Zoran Radivojevic, Nokia has already built a functional 200-by-200-pixel monochromatic screen which is energetically self-sufficient.

In 1995 the Research Institute of Toto Ltd. discovered the superhydrophilicity phenomenon for glass coated with titanium dioxide and exposed to sun light. A discovery by Professor Fujishima and his group [17] This resulted in the development of self-cleaning glass and anti-fogging coatings.

TiO2 incorporated into outdoor building materials, such as paving stones in noxer blocks or paints, can substantially reduce concentrations of airborne pollutants such as volatile organic compounds and nitrogen oxides [19].

A photocatalytic cement that uses titanium dioxide as a primary component was included in Time's Top 50 Inventions of 2008 [20].

For wastewater remediation[සංස්කරණය]

TiO2 offers great potential as an industrial technology for detoxification or remediation of wastewater due to several factors.

  1. The process occurs under ambient conditions very slowly, direct UV light exposure increases the rate of reaction.
  2. The formation of photocyclized intermediate products, unlike direct photolysis techniques, is avoided.
  3. Oxidation of the substrates to CO2 is complete.
  4. The photocatalyst is inexpensive and has a high turnover.
  5. TiO2 can be supported on suitable reactor substrates.

Other applications[සංස්කරණය]

It is also used in resistance-type lambda probes (a type of oxygen sensor).

Titanium dioxide is what allows osseointegration between an artificial medical implant and bone.

Titanium dioxide in solution or suspension can be used to cleave protein that contains the amino acid proline at the site where proline is present. This breakthrough in cost-effective protein splitting took place at Arizona State University in 2006.[21]

Titanium dioxide on silica is being developed as a form of odor control in cat litter. The purchased photocatalyst is vastly cheaper than the purchased silica beads, per usage, and prolongs their effective odor-eliminating life substantially.

Titanium dioxide is also used as a material in the memristor, a new electronic circuit element.

It can be employed for solar energy conversion based on dye, polymer, or quantum dot sensitized nanocrystalline TiO2 solar cells using conjugated polymers as solid electrolytes[22] .

It has also been recently incorporated as a photocatalyst into dental bleaching products. It allows the use of decreased concentrations of hydrogen peroxide in the bleaching agent, thus claimed to achieve similar bleaching effects with less side effects (e.g.:transient sensitivity, change in tooth surface topography, etc ...)

It is also used by film and television companies as a substitute for snow when filming scenes which require a winter setting.

Historical uses[සංස්කරණය]

The Vinland map, the map of America ("Vinland") that was allegedly drawn during mid-15th century based on data from the Viking Age, has been declared a forgery on the basis that its ink contains traces of the TiO2-form anatase; TiO2 was not synthetically produced before the 1920s. In 1992, a counter-claim was made that the compound can be formed from ancient ink.[තහවුරු කර නොමැත]

Titanium dioxide white paint was used to paint the Saturn V rocket, which is so far the only rocket that has sent astronauts to the moon. In 2002, a spectral analysis of J002E3, a celestial object, showed that it had titanium dioxide on it, giving evidence it may be a Saturn V S-IVB.

See also[සංස්කරණය]


Titanium dioxide dust, when inhaled, has recently been classified by the International Agency for Research on Cancer (IARC) as an IARC Group 2B carcinogen possibly carcinogenic to humans.[23] Titanium dioxide accounts for 70% of the total production volume of pigments worldwide. It is widely used to provide whiteness and opacity to products such as paints, plastics, papers, inks, foods, and toothpastes. It is also used in cosmetic and skin care products, and it is present in almost every sunblock, where it helps protect the skin from ultraviolet light.

With such widespread use of titanium dioxide, it is important to understand that the IARC conclusions are based on very specific evidence. This evidence showed that high concentrations of pigment-grade (powdered) and ultrafine titanium dioxide dust caused respiratory tract cancer in rats exposed by inhalation and intratracheal instillation[24]. The series of biological events or steps that produce the rat lung cancers (e.g. particle deposition, impaired lung clearance, cell injury, fibrosis, mutations and ultimately cancer) have also been seen in people working in dusty environments. Therefore, the observations of cancer in animals were considered, by IARC, as relevant to people doing jobs with exposures to titanium dioxide dust. For example, titanium dioxide production workers may be exposed to high dust concentrations during packing, milling, site cleaning and maintenance, if there are insufficient dust control measures in place. However, it should be noted that the human studies conducted so far do not suggest an association between occupational exposure to titanium dioxide and an increased risk for cancer.

The Workplace Hazardous Materials Information System (WHMIS) is Canada's hazard communication standard. The WHMIS Controlled Products Regulations require that chemicals, listed in Group 1 or Group 2 in the IARC Monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, be classified under WHMIS Class D2A (carcinogenic). The classification decision on titanium dioxide has been published on the IARC website and in a summary article published in The Lancet.

Representatives from Health Canada (National Office of WHMIS) recently consulted with the Quebec CSST and CCOHS (the two main agencies providing WHMIS classifications to the public) regarding the implications of the IARC decision to the WHMIS classification of titanium dioxide. It was agreed that titanium dioxide does now meet the criteria for WHMIS D2A (carcinogen) based on the information released by IARC to date, and that it is not necessary to wait for release of the full monograph.

Manufacturers and suppliers of titanium dioxide are advised to review and update their material safety data sheets and product labels based on this new information as soon as possible. Employers should review their occupational hygiene programs to ensure that exposure to titanium dioxide dust is eliminated or reduced to the minimum possible. Workers should be educated concerning this potential newly recognized risk to their health and trained in proper work procedures.


  1. An Ultradense Polymorph of Rutile with Seven-Coordinated Titanium from the Ries Crater, Ahmed El Goresy, Ming Chen, Leonid Dubrovinsky, Philippe Gillet, Günther Graup, Science, 2001, 293, 5534,1467 - 1470
  2. A natural shock-induced dense polymorph of rutile with α-PbO2 structure in the suevite from the Ries crater in Germany, Ahmed El Goresy, Ming Chen, Philippe Gillet, Leonid Dubrovinsky, Günther Graup and Rajeev Ahuja, Earth and Planetary Science Letters, 192, 4, 2001, 485-495,
  3. 3.0 3.1 සැකිල්ල:Greenwood&Earnshaw
  4. Marchand R., Brohan L., Tournoux M. (1980). "A new form of titanium dioxide and the potassium octatitanate K2Ti8O17". Materials Research Bulletin. 15 (8): 1129–1133. doi:10.1016/0025-5408(80)90076-8.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  5. Latroche, M.; Brohan, L.; Marchand, R.; Tournoux, (1989). "New hollandite oxides: TiO2(H) and K0.06TiO2". Journal of Solid State Chemistry. 81 (1): 78–82. doi:10.1016/0022-4596(89)90204-1.{{cite journal}}: CS1 maint: extra punctuation (link) CS1 maint: multiple names: authors list (link)
  6. J. Akimoto, Y. Gotoh, Y. Oosawa, N. Nonose, T. Kumagai, K. Aoki, H. Takei (1994). "Topotactic Oxidation of Ramsdellite-Type Li0.5TiO2, a New Polymorph of Titanium Dioxide: TiO2(R)". Journal of Solid State Chemistry. 113 (1): 27–36. doi:10.1006/jssc.1994.1337.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  7. P. Y. Simons, F. Dachille (1967). "The structure of TiO2II, a high-pressure phase of TiO2". Acta Crystallographica. 23 (2): 334–336. doi:10.1107/S0365110X67002713.
  8. Sato H. , Endo S, Sugiyama M, Kikegawa T, Shimomura O, Kusaba K (1991). "Baddeleyite-Type High-Pressure Phase of TiO2". Science. 251 (4995): 786–788. doi:10.1126/science.251.4995.786. PMID 17775458.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  9. Dubrovinskaia N A, Dubrovinsky L S., Ahuja R, Prokopenko V B., Dmitriev V., Weber H.-P., Osorio-Guillen J. M., Johansson B (2001). "Experimental and Theoretical Identification of a New High-Pressure TiO2 Polymorph". Phys. Rev. Lett. 87: 275501. doi:10.1103/PhysRevLett.87.275501.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  10. Mattesini M, de Almeida J. S., Dubrovinsky L., Dubrovinskaia L, Johansson B., Ahuja R. (2004). "High-pressure and high-temperature synthesis of the cubic TiO2 polymorph". Phys. Rev. B. 70: 212101. doi:10.1103/PhysRevB.70.212101.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  11. Dubrovinsky L. S., Dubrovinskaia N. A., Swamy V., Muscat J., Harrison N. M., Ahuja R., Holm B., Johansson B. (2001). "Materials science: The hardest known oxide". Nature. 410: 653–654. doi:10.1038/35070650.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  12. Emsley, John (2001). Nature's Building Blocks: An A–Z Guide to the Elements. Oxford: Oxford University Press. pp.  451–53. ISBN 0-19-850341-5.
  13. "Titanium Dioxide Manufacturing Processes". Millennium Inorganic Chemicals. සම්ප්‍රවේශය 2007-09-05.
  14. "The Influence of Fat Substitutes Based on Protein and Titanium Dioxide on the Sensory Properties of Lowfat Milk", http://cat.inist.fr/?aModele=afficheN&cpsidt=2079235, ප්‍රතිෂ්ඨාපනය 2009-01-18 
  15. M. D. Earle (1942). "The Electrical Conductivity of Titanium Dioxide". Physical Review. 61 (1–2): 56. doi:10.1103/PhysRev.61.56.
  16. Electrochemical Photolysis of Water at a Semiconductor Electrode AKIRA FUJISHIMA & KENICHI HONDA Nature 238, 37 - 38 (07 July 1972);
  17. 17.0 17.1 "Discovery and applications of photocatalysis —Creating a comfortable future by making use of light energy"
  18. (Document Unavilable), http://highbeam.com/doc/1G1-110587279.html, ප්‍රතිෂ්ඨාපනය 2009-01-18 
  19. "Smog-busting paint soaks up noxious gases", Jenny Hogan, 'newscientist.com, 4 February 2004
  20. TIME's Best Inventions of 2008 සංරක්ෂණය කළ පිටපත 2008-11-02 at the Wayback Machine, October 31, 2008
  21. B. J. Jones, M. J. Vergne, D. M. Bunk, L. E. Locascio and M. A. Hayes (2007). "Cleavage of Peptides and Proteins Using Light-Generated Radicals from Titanium Dioxide". Anal. Chem. 79 (4): 1327–1332. doi:10.1021/ac0613737.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  22. සංරක්ෂිත පිටපත, http://chemistry.ucsc.edu/~zhang/research/, ප්‍රතිෂ්ඨාපනය 2009-01-18 
  23. සංරක්ෂිත පිටපත, 93, International Agency for Research on Cancer, 2006, http://monographs.iarc.fr/ENG/Meetings/93-titaniumdioxide.pdf, ප්‍රතිෂ්ඨාපනය 2009-01-18 
  24. Kutal, C., Serpone, N. (1993). Photosensitive Metal Organic Systems: Mechanistic Principles and Applications. American Chemical Society, Washington D.C.

External links[සංස්කරණය]