සැකිල්ල:Chembox
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
මෙම සැකිල්ල පිටු 12,000 පමණ භාවිතා වන නිසා සිදුකරන වෙනස් කිරීම් බොහෝ ස්ථානවලට බලපානු ඇත. ඔබ සිදුකිරීමට අදහස් කරන වෙනස්කම් මෙම සැකිල්ලට අදාළ /sandbox හෝ /testcases උපපිටුවල, හෝ ඔබගේ පරිශීලක උපපිටුවේ පළමුව සිදුකොට පරීක්ෂාකර බලන්න. එම වෙනස්කම් සිදුකිරීමට ප්රථම අදාළ සාකච්ඡා පිටුවේ ඒ පිළිබඳව සංවාදයක් ගොඩනැගීමට කාරුණික වන්න.
Transclusion count updated automatically (ප්රලේඛනය වෙතට යොමුවන්න). |
This template adds an automatically generated short description. |
මෙම සැකිල්ල ලුවා භාවිතා කරයි: |
This template uses TemplateStyles: |
Template {{Chembox}}
is an infobox for chemicals. It has a large number of options to add relevant data and images. The infobox is organized in sections like "identifiers" and "hazards".
Usage
[සංස්කරණය]The Chembox has a modular design. After the general information like the chemical name and images, it can be built from multiple sections, each covering a group of information (like "pharmacology"). Depending on the compound, sections can be added or left out, and within a section parameters can be added or omitted (left blank).
The sections and their parameters are listed below.
Within the general chembox template (with its own parameters like |ImageFile=
and |IUPACName=
), each section is added with this pattern (as the value of a parameter |Sectionx=
.
{{Chembox | ImageFile = | IUPACName = <!-- more general Chembox parameters here --> | Section1 = {{Chembox Identifiers | CASNo = | PubChem = <!-- more Identifier parameters here --> }} }}
In this format, spaces and new lines have no meaning and can be used freely to separate sections (though within a data value, a space has a meaning, except generally leading and trailing spaces).
Each section has its own number in |Section#=
. Then a section is defined with "|Section# = {{Chembox "
and ends with "}}"
. Sections cannot 'nest': one must close one section with }}
before adding another |Section#= {{Chembox ...
.
Keep in mind the advice in the main Infobox documentation to use the {{Unbulleted list}} template to present multiple values for a parameter so as to ensure that the values are each started on a new line and tagged appropriately in the underlying markup. This is particularly important with parameters like |OtherNames=
, since many names use commas within them, and using commas as separators leads to ambiguity. For example:
| OtherNames = {{Unbulleted list | 2,4,6(1''H'',3''H'',5''H'')-pyrimidinetrione | 2,4,6-trioxohexahydropyrimidine | pyrimidinetriol | malonylurea | 6-hydroxyuracil | ''N'',''N''-(1,3-dioxo-1,3-propanediyl)urea }} | (nextparameter)= <!-- etc. -->
Small, simple form
[සංස්කරණය]To use, simply copy and paste the left column into the document, filling in whatever you can, and save:
{{Chembox <!-- Images --> | ImageFile = | ImageSize = | ImageAlt = <!-- Names --> | IUPACName = | OtherNames = <!-- Sections --> | Section1 = {{Chembox Identifiers | CASNo = | PubChem = | SMILES = }} | Section2 = {{Chembox Properties | Formula = | MolarMass = | Appearance = | Density = | MeltingPt = | BoilingPt = | Solubility = }} | Section3 = {{Chembox Hazards | MainHazards = | FlashPt = | AutoignitionPt = }} }} |
Medium form
[සංස්කරණය]To use, simply copy and paste the left column into the document, filling in whatever you can:
{{Chembox | Reference = <!-- Names --> | Name = | IUPACName = | PIN = | SystematicName = | OtherNames = {{Unbulleted list | ''name1'' | ''name2'' ... | ''name50'' }} | data page pagename = <!-- Images --> | ImageFile = | ImageSize = | ImageAlt = | ImageName = | ImageCaption = | ImageFile1 = | ImageSize1 = | ImageAlt1 = | ImageName1 = | ImageCaption1 = | ImageFile2 = | ImageSize2 = | ImageAlt2 = | ImageName2 = | ImageCaption2 = | ImageFile3 = | ImageSize3 = | ImageAlt3 = | ImageName3 = | ImageFileL1 = | ImageSizeL1 = | ImageAltL1 = | ImageNameL1 = | ImageFileR1 = | ImageSizeR1 = | ImageAltR1 = | ImageNameR1 = | ImageFileL2 = | ImageSizeL2 = | ImageAltL2 = | ImageNameL2 = | ImageFileR2 = | ImageSizeR2 = | ImageAltR2 = | ImageNameR2 = <!-- Sections --> | Section1 = {{Chembox Identifiers | 3DMet = | Abbreviations = | Beilstein = | CASNo = | CASNo_Comment = | CASNoOther = | ChEBI = | ChemSpiderID = | EINECS = | EC_number = | EC_number_Comment= | Gmelin = | InChI = | KEGG = | MeSHName = | PubChem = | RTECS = | SMILES = | UNNumber = }} | Section2 = {{Chembox Properties | AtmosphericOHRateConstant = | Appearance = | BoilingPt = | BoilingPtC = | BoilingPt_ref = | BoilingPt_notes= | Density = | Formula = | HenryConstant = | LogP = | MolarMass = | MeltingPt = | MeltingPtC = | MeltingPt_ref = | MeltingPt_notes= | pKa = | pKb = | Solubility = | SolubleOther = | Solvent = | VaporPressure = }} | Section3 = {{Chembox Structure | Coordination = | CrystalStruct = | MolShape = }} | Section4 = {{Chembox Thermochemistry | DeltaGf = | DeltaHc = | DeltaHf = | Entropy = | HeatCapacity = }} | Section5 = {{Chembox Explosive | ShockSens = | FrictionSens = | DetonationV = | REFactor = }} | Section6 = {{Chembox Pharmacology | ATCvet = | ATCCode_prefix = | ATCCode_suffix = | ATC_Supplemental= | AdminRoutes = | Bioavail = | Excretion = | HalfLife = | Metabolism = | Legal_status = | Legal_AU = | Legal_AU_comment= | Legal_CA = | Legal_CA_comment= | Legal_NZ = | Legal_NZ_comment= | Legal_US = | Legal_US_comment= | Legal_UK = | Legal_UK_comment= | Legal_EU = | Legal_EU_comment= | Legal_UN = | Legal_UN_comment= | Pregnancy_category = | Pregnancy_AU = | Pregnancy_AU_comment = | ProteinBound = | Dependence_liability = | Addiction_liability = }} | Section7 = {{Chembox Hazards | AutoignitionPt = | ExploLimits = | FlashPt = | LD50 = | LC50 = | MainHazards = | NFPA-H = | NFPA-F = | NFPA-I = | NFPA-S = | PEL = | REL = | ExternalSDS = | GHSPictograms = | GHSSignalWord = | HPhrases = | PPhrases = }} | Section9 = {{Chembox Related | OtherAnions = | OtherCations = | OtherFunction = | OtherFunction_label = | OtherCompounds = }} }} |
. Reference, use |
Full form
[සංස්කරණය]To use, simply copy and paste the left column into the document, and press save to get an empty Chembox:
Long parameter list for {{Chembox}}
| ||
---|---|---|
|
Indexed parameters
[සංස්කරණය]| CASNo = | CASNo1 = | CASNo2 = | CASNo3 = | CASNo4 = | CASNo5 = | CASNoOther =
Indexed parameters
|
---|
Overview | CASNo = | CASNo1 = | CASNo5 = | CASNoOther = | ChEBI = | ChEBI1 = | ChEBI5 = | ChEBIOther = | ChEMBL = | ChEMBL1 = | ChEMBL5 = | ChEMBLOther = | ChemSpiderID = | ChemSpiderID1 = | ChemSpiderID5 = | ChemSpiderIDOther = | DrugBank = | DrugBank1 = | DrugBank5 = | DrugBankOther = | InChI = | InChI1 = | InChI5 = | InChIOther = | KEGG = | KEGG1 = | KEGG5 = | KEGGOther = | PubChem = | PubChem1 = | PubChem5 = | PubChemOther = | SMILES = | SMILES1 = | SMILES5 = | SMILESOther = | UNII = | UNII1 = | UNII5 = | UNIIOther = | 3DMet= | 3DMet1= | 3DMet5= | 3DMetOther= | EC_number1= | EC_number5= | EC_numberOther= | RTECS1= | RTECS5= | RTECSOther= |
Indexed parameters take indexes 'blank', 1–5 (six options together). They should have straight input, such as a correct CAS Registry Number.
- Eight base parameters are indexed this way, all identifiers:
CASNo, ChEBI, ChEMBL, ChemSpiderID, DrugBank, InChI, KEGG, PubChem, SMILES, UNII, 3DMet, EC_number, RTECS
- Then
|_Other=
(like|CASNoOther=
) is available for free text input.
same substance, same index
[සංස්කරණය]When the chembox has multiple substances, you can use the index. Make sure that |CASNo3=
and |SMILES3=
are about the same substance, and |CASNo3=
and |SMILES2=
are not. Treat index "0" the same way:
|CASNo=
is|InChI=
is|SMILES=
|CASNo1=
is|InChI1=
is|SMILES1=
|CASNo=
is not|InChI1=
is not|SMILES4=
Labeling the substances
[සංස්කරණය]By using a parameter like |index2_label=
, you can prefix every #2-input with that same prefix.
{{chembox
| Name = [[Linalool]]
|Section1 = {{Chembox Identifiers
| index_label =
| index1_label = (''R'')
| index2_label = (''S'')
| index_comment = (+/-)-linalool
| index1_comment = (-)-linalool
| index2_comment = (+)-linalool
| CASNo = 78-70-6
| CASNo1 = 126-91-0
| CASNo2 = 126-90-9
| CASNo_Ref = {{cascite|correct|CAS}}
| PubChem = 6549
| PubChem1 = 443158
| PubChem2 = 67179
}}
}}
Identifiers | |
---|---|
| |
CAS number | {{{value}}} |
ChEBI | CHEBI:{{{value}}} |
ChemSpider | |
DrugBank | |
KEGG | {{{value}}} |
PubChem | {{{value}}} |
RTECS number | {{{value}}} |
UNII | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
- For specific additions, each parameter has a
|_Comment=
option.
| CASNo_Comment = | CASNo1_Comment = | CASNo5_Comment =
- Use of the
|CASNo_Ref={{cascite|correct|CAS}}
parameter with argument places a small, green check mark, , after the CAS No., which indicates that an editor has confirmed that the CAS No. is correct. A red x in an infobox that follows any identifier means it has not been verified. See WP:CHEMVAL for more details.
Section subtemplates
[සංස්කරණය]The following section subtemplates are available:
- {{Chembox Identifiers}}
- {{Chembox Properties}}
- {{Chembox Structure}}
- {{Chembox Thermochemistry}}
- {{Chembox Explosive}}
- {{Chembox Pharmacology}}
- {{Chembox Hazards}}
- {{Chembox Related}}
And the automated section, that is visible when 'pagename (data page)' exists:
See these subsections for their parameter options.
The order of these sections in the infobox is set by the section number (|Section#=
) only. Not by the typed sequence. This documentation keeps this arbitrary order:
| Section1 = {{Chembox Identifiers}} | Section2 = {{Chembox Properties}} | Section3 = {{Chembox Structure}} | Section4 = {{Chembox Thermochemistry}} | Section5 = {{Chembox Explosive}} | Section6 = {{Chembox Pharmacology}} | Section7 = {{Chembox Hazards}} | Section9 = {{Chembox Related}}
Sections that are not used can be safely removed, renumbering is not necessary.
Container only
[සංස්කරණය]{{Chembox}} can be used to show a subsection only, for example Section3={{Chembox Hazards|...}}
. When set |container_only=yes
: The main {{Chembox}} is not tracked at all (image checks, bot validation categories, etc.), and the Footer (with STP notice) is suppressed. Example: Bromine#Biological role and toxicity. The article will be listed in ප්රවර්ගය:Chembox container only (0).
Automatic generation
[සංස්කරණය]The Wikipedia Drugbox and Chembox Maker can be used to automatically generate chembox templates. For quicker access, this tool can be added to the tools section of Wikipedia's left sidebar via User:Qwerfjkl/scripts/chemboxmaker. The Wikipedia template filling tool by Diberri and Boghog is another option for automatic chembox generation but fills fewer fields.
Adding images
[සංස්කරණය]Parameters
[සංස්කරණය]Image parameters for the first images:
{{Chembox
<!-- Other chembox parameters can go here -->
<!-- Row 1/7 -->
| ImageFile =
| ImageName =
| ImageSize =
| ImageAlt =
| ImageCaption =
| ImageFile_Ref =
<!-- Row 2/7 -->
| ImageFile1 =
| ImageName1 =
| ImageSize1 =
| ImageAlt1 =
| ImageCaption1 =
| ImageFile1_Ref =
<!-- Row 3/7 -->
| ImageFileL1 =
| ImageNameL1 =
| ImageSizeL1 =
| ImageAltL1 =
| ImageCaptionL1 =
| ImageFileL1_Ref=
| ImageFileR1 =
| ImageNameR1 =
| ImageSizeR1 =
| ImageAltR1 =
| ImageCaptionR1 =
| ImageFileR1_Ref=
| ImageCaptionL1R1=
<!-- More chembox parameters can go here, like |Section1=... -->
}}
Examples
[සංස්කරණය]Image parameters for an image (example: File1). All are optional.
A caption shows here
| |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
{{Chembox | ImageFile1 = Furfural.svg | ImageAlt1 = Skeleton formula of a ring of four carbons and one oxygen, with a carbon-oxygen attached to a carbon next to an oxygen | ImageName1 = | ImageCaption1 = A caption shows here | ImageSize1 = | ImageFile1_Ref = ref }}
Adding two images:
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
{{Chembox | ImageFile = Furfural.svg | ImageAlt = Skeleton formula of a ring of four carbons and one oxygen, with a carbon-oxygen attached to a carbon next to an oxygen | ImageFile1 = Furfural-3D-vdW.png | ImageAlt1 = 3D filled-sphere model of the same molecule }}
This gives two images, each image on his own row (note, ImageFile is the first image, ImageFile1 is the second).
Adding two images, side by side (L1 and R1):
| |||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
{{Chembox | ImageFileL1 = Furfural.svg | ImageAltL1 = Skeleton formula of a ring of four carbons and one oxygen, with a carbon-oxygen attached to a carbon next to an oxygen | ImageFileR1 = Furfural-3D-vdW.png | ImageAltR1 = 3D filled-sphere model of the same molecule }}
This gives one row with two images. Note that ImageFile is now not supplied.
Multiple images
[සංස්කරණය]Chembox image ordering ( | )||
---|---|---|
row 1 | ImageFile | |
row 2 | ImageFile1 | |
row 3 | ImageFileL1 | ImageFileR1 |
row 4 | ImageFile2 | |
row 5 | ImageFileL2 | ImageFileR2 |
row 6 | ImageFile3 | |
row 7 | ImageFileL3 | ImageFileR3 |
This gives the possibility to play a bit with which image is first (rows with empty parameters are not displayed). Example:
| |||
Names | |||
---|---|---|---|
IUPAC name
example
| |||
{{Chembox | ImageFileL1 = Furfural.svg | ImageAltL1 = Skeleton formula of a ring of four carbons and one oxygen, with a carbon-oxygen attached to a carbon next to an oxygen | ImageFileR1 = Furfural-3D-vdW.png | ImageSizeR1 = | ImageAltR1 = 3D filled-sphere model of the same molecule | ImageFile2 = Water droplet blue bg05.jpg | ImageAlt2 = Water droplet erupting from the center of a concentric ring of ripples, evidently in response to a drop landing in the water just before | IUPACName = example }}
This gives one row with two images, and one row with one image.
Names
[සංස්කරණය]
{{Chembox <!-- Names --> | Name = | IUPACName = | IUPACNames = | PIN = | SystematicName = | OtherNames = <!-- other parameters --> }} |
Infobox title (Pagetitle is default) IUPAC name Using -s makes section header plural Preferred IUPAC name Systematic IUPAC name List of all other name(s) |
Example
[සංස්කරණය]Names | |
---|---|
IUPAC names
A, B
| |
Preferred IUPAC name
PIN | |
Systematic IUPAC name
SYS | |
වෙනත් නාම
X
Y Z | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
{{Chembox | Name = ''cis''-3-Hexen-1-ol | IUPACNames = A, B | PIN = PIN | SystematicName = SYS | OtherNames = X<br/>Y<br/>Z }}
Input from Wikidata
[සංස්කරණය]- E number (P628) (see uses)
- ECHA Substance Infocard ID (P2566) (see uses)
- DSSTox substance ID (P3117) (see uses)
E number, ECHA InfoCard ID, |DTXSID=
(CompTox Chemicals Dashboard) are read from Wikidata.
Maintenance
[සංස්කරණය]Troubleshooting
[සංස්කරණය]- When supplying a parameter with a value, and nothing or the wrong value shows up, check:
- Is the parameter placed in the correct section?
- Are the sections properly defined? Sections start with | Section# = {{Chembox sectionname |" and end with "}}".
- Is there inconsistency in the Section numbering? Available numbers for sections are 1 – 9.
Tracking categories
[සංස්කරණය]- ප්රවර්ගය:Chembox tracking categories (10)
- ප්රවර්ගය:Pages using Chembox with unknown parameters (19)
TemplateData
[සංස්කරණය]TemplateData for Chembox
An infobox for chemicals. It has a large number of options to add relevant data and images. The Chembox has a modular design. After the general information like the chemical name and images, it can be built from multiple sections, each covering a group of information (like "pharmacology"). Depending on the compound, sections can be added or left out, and within a section parameters can be added or omitted (left blank). Please see this template's page for full documentation.
|
See also
[සංස්කරණය]- {{Infobox drug}} (aka Drugbox)
- Wikipedia Drugbox and Chembox Maker