සැකිල්ල:උල්පත් තොරතුරු පැනලය

සැකිලි ප්‍රලේඛනය[නරඹන්න] [සංස්කරණය] [ඉතිහාසය] [විරේචනය]

This template can be used to create an infobox for a spring, including geysers or hot springs.

Usage

උල්පත් තොරතුරු පැනලය

උල්පත් තොරතුරු පැනලය

Commonly used		All parameters
{{Infobox spring | name = | photo = | photo_width = | photo_caption = | map = <!-- or | map_image = --> | map_width = | map_caption = | name_origin = | location = | elevation = | coordinates = | coords_ref = | mapframe = | hot_spring_type = | height = | duration = | frequency = | discharge = | temperature = | depth = }}		{{Infobox spring | name = | other_name = | photo = | photo_width = | photo_alt = | photo_caption = | map = <!-- or | map_image = --> | relief = | map_width = | map_alt = | map_caption = | mark = | marker_width = | label = | label_position = | name_origin = | location = | spring_source = | elevation = | coordinates = | coords_ref = | mapframe = | hot_spring_type = | type = | provides = | magnitude = | height = | duration = | frequency = | discharge = | temperature = | depth = | child = | embedded = }}

Parameter descriptions

Parameter	Description
name	Required. Official name of the geothermal feature (e.g. Old Faithful Geyser)
other_name	If the feature is also commonly known by another name then use this parameter for the alternate name.
photo	The name of an image file to be displayed. No special formatting is needed. For geysers, a photo of the eruption is preferred.
photo_width	The image width in pixels. If specified, the maximum width is 280px. If not specified, the image uses frameless with upright=1.1 which displays it at approximately 110% of the user's default thumbnail size (for most users the image will display at 240px; for logged-in users who have changed the setting at Special:Preferences the displayed image could range from 130px to 440px). See also: Module:InfoboxImage, WP:AUTOSIZE, WP:EIS, WP:IMGSIZE, and MOS:IMGSIZE.
photo_alt	Alternate text for the photo for visually impaired readers. See WP:ALT.
photo_caption	The caption that will display bellow the image. Include month and year of picture, if known.
Location-related parameters
map	The name of the location map to be displayed. See Map display methods below. To use a static image, use |map_image=
map_image	The file name of a static map image to be displayed. To use a location map, use |map=.
map_relief	When the geographical coordinates method is used (see Map display methods), any non-blank value (map_relief=yes, map_relief=1, etc.) will cause the template to display a relief map image, where available. For additional information, see Template:Location map#Relief parameter.
map_size or map_width	Width to display the map image in pixels. The default and maximum is 220. For example, map_width=200 (not map_px).
map_alt	Alternative text for the map image, see WP:ALT.
map_caption	Text displayed below the map image, if required.
mark	The image to use for the marker. The default is Red pog.svg. See Template:Location map for more information.
marker_width	The display width of the marker image in pixels. Default = 8.
label	Text that will be displayed next to the marker. Works with label_position below.
label_position	Specifies the position of a label with respect to the marker. Valid values are left, right, top, bottom and none. See label above.
coordinates	Can be used with {{coord}} template to display geographical coordinates and a pushpin on an optional map.
coords_ref	Used with <ref>...</ref> tags to cite a references.
mapframe	Map frame using {{infobox mapframe}}, see #Mapframe maps
Other parameters
name_origin	Where did the name of this feature originate? Who named this feature?
location	Textual description of the location of the feature. The specific location of the geyser first, followed by the general region. For well known geyser regions, use the local group or basin (e.g., Lower Geyser Basin, Yellowstone National Park).
spring_source	Source for the water for the spring.
elevation	The elevation of the feature (don't forget to include both feet and meters).
hot_spring_type	The type of geothermal features. Possible options are geyser, fumarole, mud pot or hot spring. Geysers can be cone or fountain geysers. For non-geothermal springs, use type
type	The type of spring. Possible options are. For geothermal springs, use hot_spring_type
provides	Body of water into which the spring discharges.
height	For geysers, the minimum to maximum height of an eruption (e.g. - 15 - 20 minutes)
duration	For geysers, the minimum to maximum duration of an eruption
frequency	For geysers, the average frequency of an eruption
discharge	Water discharge for a geyser or a flowing spring
magnitude	The magnitude of the discharge as measured by the spring classification scale
temperature	For pools, the average temperature of the water in degrees Fahrenheit and Celsius
depth	For pools, the average depth of the feature
child	Used to embed this template in another. See below.
embedded	Used to embed another template in this one. See below.

Map display methods

This template uses Template:Location map. For more details, see the documentation for that template.

Simple map image method

Any map image can be displayed by specifying the name of the image file. Notice that when a photo and a map are specified the map will appear at the bottom of the infobox and that if no photo is specified the map will be displayed at the top.

Daisy Geyser
Daisy Geyser during an eruption
Daisy Geyser, අන්තර් ක්‍රියාකාරී සිතියම
Name origin	Hague Geological Surveys, 1880s
Location	Upper Geyser Basin, Yellowstone National Park, Teton County, Wyoming
ඛණ්ඩාංක	44°28′12″N 110°50′42″W
Elevation	7,329 feet (2,234 මී)
Temperature	84.5 °C (184.1 °F)
Map of Upper Geyser Basin

{{Infobox spring
| name = Daisy Geyser
| photo = Daisy Geyser erupting in Yellowstone National Park edit.jpg
| photo_width = <!-- omitted to display at user's default size -->
| photo_caption = Daisy Geyser during an eruption
| map_image = NorthernSectionUpperGeyserBasin-Daisy.jpg
| map_caption = Map of Upper Geyser Basin
| map_size = 200
| name_origin = Hague Geological Surveys, 1880s
| location = Upper Geyser Basin, Yellowstone National Park, [[Teton County, Wyoming]]
| coordinates = {{coord|44|28|12|N|110|50|42|W|display=inline}}
| coords_ref = 
| elevation = {{convert|7329|ft|0}}
| temperature = 84.5 °C (184.1 °F) 
}}

Big Cone
Big Cone Geyser
Big Cone, අන්තර් ක්‍රියාකාරී සිතියම
Location	West Thumb Geyser Basin, Yellowstone National Park, Teton County, Wyoming
ඛණ්ඩාංක	44°25′03″N 110°34′14″W
Elevation	7,864 feet ()
West Thumb Geyser Basin

{{Infobox spring
| name = Big Cone
| photo = Big cone.jpg
| photo_width = 400px <!-- if a size in pixels is specified, the image will not display any larger than 280px -->
| photo_caption = Big Cone Geyser
| map_image = WestThumbGeyserBasin-Big Cone.jpg
| map_caption = West Thumb Geyser Basin
| map_alt = Map shows Big Cone is in the West Thumb Geyser Basin.
| map_size = 
| location = West Thumb Geyser Basin, Yellowstone National Park, [[Teton County, Wyoming]]
| coordinates = {{coord|44|25|03|N|110|34|14|W|type:landmark_region:US-WY}}
| coords_ref = 
| elevation = {{convert|7864|ft|m|1}}
}}

Geographical coordinate method

A mark can be superimposed on one of a set of special map templates. If a valid map name is specified this is the method the template will attempt to use. To display a mark, the geographic coordinates must be specified using the {{Coord}} template. See the documentation for {{Location map}}. The parameters for this template correspond with a subset of the parameters for Template:Location map. A map template can be found using these sources:

List of templates - Many of the items listed here are redirects and a few templates may not function as expected.

Category:Location map templates - templates sorted by category.

Special:WhatLinksHere/Template:Location map/Info - a search that might help.

Special:Prefixindex/Template:Location map - another search that might help.

All of the names begin with the words "Location map" followed by the area covered. The value you need to specify is the area name. The map template for the for Alberta, Canada is Module:Location map/data/Canada Alberta. In this case specify map=Canada Alberta or, in this case, map=Alberta. The following example does not produce output that is optimum for use with the geysers of Yellowstone but demonstrates the method.

Big Alcove Spring
Big Alcove Spring Location of Big Alcove Spring in Wyoming
ඛණ්ඩාංක	44°43′8″N 110°42′24″W

{{Infobox spring
| name = Big Alcove Spring
| map = USA Wyoming
| map_alt = Big Alcove Spring is located in the northwestern Wyoming
| map_caption = Location of Big Alcove Spring in Wyoming
| map_width = 200
| label = Big Alcove Spring
| coordinates = {{coord|44|43|8|N|110|42|24|W|region:US-WY|display=inline <!-- just to be tidy -->}}
}}

The label is optional. By default it is usually displayed to the left of the mark.

Mapframe maps

• Basic {{Infobox mapframe}} parameters:
  • mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no, but also modified by onByDefault
    • Internal onByDefault parameter: yes, unless there is a |pushpin map=
  • mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata d:Property:P625
  • mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
  • mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, most mapframe parameters will be ignored. Default: not specified
  • mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
  • mapframe-wikidata – Set to yes to show all shape/line features from OpenStreetMap. Default: not specified
• Customise which features are displayed:
  • mapframe-point – Turn off display of point feature by setting to none. Force point marker to be displayed by setting to on. Default: not specified
  • mapframe-shape – Turn off display of shape feature by setting to none. Force display of shape by setting to on. Use an inverse shape (geomask) instead of a regular shape by setting to inverse. Default: not specified
  • mapframe-line – Turn off display of line feature by setting to none. Force display of line by setting to on. Default: not specified
  • mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for රට (P17), P131 for එය පිහිටා ඇති පරිපාලන ඒකකය (P131)). Default: not specified
  • mapframe-switcher – set to auto or geomasks or zooms to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
    • auto – switch geomasks found in පිහිටීම (P276) and එය පිහිටා ඇති පරිපාලන ඒකකය (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.
    • geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
    • zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average
• Other optional parameters:
  • mapframe-frame-width or mapframe-width – Frame width. Default: 250
  • mapframe-frame-height or mapframe-height – Frame height. Default: 200
  • mapframe-shape-fill – Color used to fill shape features. Default: #606060
  • mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.1
  • mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
    • mapframe-line-stroke-color or mapframe-line-stroke-colour – Color of line features. Default: #ff0000
    • mapframe-shape-stroke-color or mapframe-shape-stroke-colour – Color of outlines of shape features. Default: #ff0000
  • mapframe-stroke-width – Width of line features, and outlines of shape features. Default: 2
    • mapframe-shape-stroke-width – Width of outlines of shape features. Default: 2
    • mapframe-line-stroke-width – Width of line features. Default: 5
  • mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: hot-spring
    • Can also be set to blank to override any default marker symbol
  • mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #A8BDEC
  • mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
  • mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 1
  • mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
  • mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.25
  • mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
  • mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified / not specified / not specified / not specified
  • mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates
  • mapframe-type – Set the type of the object, with the same usage as {{coord}}. Default: not specified
  • mapframe-population – Set the population, useful with type="city", for {{Infobox dim}}. Default: not specified

Template embedding

This template can be embedding in another infobox template by adding the code |child=yes. To embed another template in this one use |embedded={{Infobox ....

Microformats

The articles created using this template include an hCard microformat. For more information read this.

Tracking category

• ප්‍රවර්ගය:Pages using infobox spring with unknown parameters (8)

ඉහත ප්‍රලේඛනය සැකිල්ල:උල්පත් තොරතුරු පැනලය/doc වෙතින් අන්තහ්කරණය කොට ඇත . (සංස්කරණය | ඉතිහාසය)
මෙම සැකිල්ලෙහි වැලිපිල්ල (තනන්න | ආදර්ශය) සහ පරික්ෂණ අවස්ථා (තනන්න) පිටුවල, සංස්කාරක වරුන්ට පර්යේෂණ සිදු කල හැක.
කරුණාකර /ලේඛය උපපිටුවට ප්‍රවර්ග එක්කරන්න. සැකිල්ලෙහී උපපිටු.