සැකිල්ල:තොරතුරුකොටුව වේල්ල/ලේඛය

විකිපීඩියා වෙතින්

Usage[සංස්කරණය]

Use the following infobox for all types of hydroelectric power stations involving dams, including pumped-storage. For all types of wave and tidal power stations, as well as all other types of power stations, please use {{Infobox power station}}.

තොරතුරුකොටුව වේල්ල/ලේඛය
{{Infobox dam
| name                                 = 
| name_official                        = 
| image                                = 
| image_size                           = 
| image_caption                        = 
| image_alt                            = 
| location_map                         = 
| location_map_size                    = 
| location_map_caption                 = 
| location_map_alt                     = 
| coordinates                          = <!-- {{coord|..|..|type:landmark|display=inline,title}}-->
| country                              = 
| location                             = 
| purpose                              = 
| status                               = 
| construction_began                   = 
| opening                              = 
| demolished                           = 
| cost                                 = 
| builder                              = 
| designed_by                          =
| owner                                = 
| operator                             = 
| dam_type                             = 
| dam_crosses                          = 
| dam_height_foundation                = 
| dam_height_thalweg                   = 
| dam_length                           = 
| dam_elevation_crest                  = 
| dam_width_crest                      = 
| dam_width_base                       = 
| dam_volume                           = 
| spillway_count                       =
| spillway_type                        =
| spillway_length                      =
| spillway_capacity                    =
| spillway_volumetric_flow_rate        =
| spillway_type2                       =
| spillway_length2                     =
| spillway_capacity2                   =
| spillway_volumetric_flow_rate2       =
| spillway_type3                       =
| spillway_length3                     =
| spillway_capacity3                   =
| spillway_volumetric_flow_rate3       =
| res_name                             = 
| res_capacity_total                   = 
| res_capacity_active                  = 
| res_capacity_inactive                = 
| res_catchment                        = 
| res_surface                          = 
| res_max_length                       = 
| res_max_width                        = 
| res_max_depth                        = 
| res_elevation                        = 
| res_tidal_range                      = 
| lower_dam_type                       = 
| lower_dam_crosses                    = 
| lower_dam_height_foundation          = 
| lower_dam_height_thalweg             = 
| lower_dam_length                     = 
| lower_dam_elevation_crest            = 
| lower_dam_width_crest                = 
| lower_dam_width_base                 = 
| lower_dam_volume                     = 
| lower_spillway_count                 =
| lower_spillway_type                  =
| lower_spillway_length                =
| lower_spillway_capacity              =
| lower_spillway_volumetric_flow_rate  =
| lower_spillway_type2                 =
| lower_spillway_length2               =
| lower_spillway_capacity2             =
| lower_spillway_volumetric_flow_rate2 =
| lower_spillway_type3                 =
| lower_spillway_length3               =
| lower_spillway_capacity3             =
| lower_spillway_volumetric_flow_rate3 =
| lower_res_name                       = 
| lower_res_capacity_total             = 
| lower_res_capacity_active            = 
| lower_res_capacity_inactive          = 
| lower_res_catchment                  = 
| lower_res_surface                    = 
| lower_res_max_length                 = 
| lower_res_max_width                  = 
| lower_res_max_depth                  = 
| lower_res_elevation                  = 
| lower_res_tidal_range                = 
| plant_name                           = 
| plant_coordinates                    = <!-- {{coord|..|..|type:landmark|display=inline}}-->
| plant_operator                       = 
| plant_commission                     = 
| plant_decommission                   = 
| plant_type                           = 
| plant_hydraulic_head                 = 
| plant_turbines                       = 
| plant_pumpgenerators                 = 
| plant_pumps                          = 
| plant_capacity                       = 
| plant_capacity_factor                = 
| plant_efficiency                     = 
| plant_storage_hours                  = 
| plant_annual_gen                     = 
| plant_annual_gen_year                = 
| website                              = 
| extra                                = 
}}

Parameter names and descriptions[සංස්කරණය]

Parameter name Description
name Name of dam.
name_official Official name, if different from name. Preferably in native language.
image Image filename, without File: parameter. Animated (.gif) and media files (.ogv) are also allowed.
image_size Value to overrides the default 250px.
image_caption Caption beneath image.
image_alt Alternative text for image.
location_map Name of a location map file. The coordinates must be specified as well (see below).
location_map_size Value to overrides the default 250px.
location_map_caption Caption beneath location map.
location_map_alt Alternative text for location map.
coordinates Geographic coordinates using {{coord}}. See here for more details. Remember to avoid being overly precise.
country Country where the facility is located. Do not use flag icons.
location General area where located. Avoid being overly-detailed.
purpose Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes,
consider using: Multi-purpose. Field codes:
F=Flood control, I=Irrigation, N=Navigation, P=Power, W=Water supply.
status Current status of the project. Enter any one of the following auto-expanding fields:
D=Decommissioned, O=Operational, P=Proposed, UC=Under construction.
construction_began Date construction began, consider using {{Start date}}.
opening Date, or future date, of inauguration. Consider using {{Start date}}.
demolished Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}.
cost Total cost of development.
builder Builder(s) of the dam.
owner Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible.
Example: Owner1: 60% <br/>Owner2: 40%
designed_by Designers of the dam.
operator Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.
DAM AND SPILLWAYS
dam_type Type of dam. Enter any one of the following auto-expanding fields:
A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, H=Rock-fill dam,AG=Arch-gravity dam.
dam_crosses Body of river or stream below dam
dam_height Height of dam. Deprecated parameter; use only if dam_height_foundation or dam_height_thalweg is not known.
dam_height_foundation Height over foundation bed, with metric conversions.
dam_height_thalweg Height over thalweg (riverbed), with metric conversions.
dam_length Length of dam crown, with metric conversions.
dam_elevation_crest Height of the dam's crest above sea level, with metric conversions.
dam_width_crest Width at crest of dam, with metric conversions.
dam_width_base Width at base of dam, with metric conversions.
dam_volume Volume of material in the dam structure.
spillway_count Number of spillways.
spillway_type Type of spillway.
spillway_length Length of spillway.
spillway_capacity Capacity of spillway.
spillway_volumetric_flow_rate Spillway volumetric flow rate.
spillway_type2 Type of 2nd spillway.
spillway_length2 Length of 2nd spillway.
spillway_capacity2 Capacity of 2nd spillway.
spillway_volumetric_flow_rate2 2nd Spillway volumetric flow rate.
spillway_type3 Type of 3rd spillway.
spillway_length3 Length of 3rd spillway.
spillway_capacity3 Capacity of 3rd spillway.
spillway_volumetric_flow_rate3 3rd Spillway volumetric flow rate.
RESERVOIR
res_name Name of upstream body of water, if different than "dam_crosses".
res_capacity_total Capacity of reservoir, i.e. megalitres.
res_capacity_active The active, live or useful capacity (storage) of the reservoir.
res_capacity_inactive The inactive or dead capacity (storage) of the reservoir.
res_catchment Area of catchment for reservoir.
res_surface Surface area (top water level) of reservoir.
res_max_length Length of the reservoir at normal levels, with metric conversions.
res_max_width Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.
res_max_depth Maximum water depth of reservoir.
res_elevation The reservoir's height above sea level at normal levels, with metric conversions.
res_tidal_range Tidal range, if applicable.
POWER STATION
plant_name Name of plant, if applicable.
plant_coordinates Geographic coordinates of the power station using {{coord}}. See here for more details. Remember to avoid being overly precise.
plant_operator Operator(s) of the hydroelectric power plant.
plant_commission Power plant commissioning date. May be different than dam opening date.
plant_decommission Power plant decommissioning date. May be different than dam closing date.
plant_type Type of hydroelectric power station. Enter any one of the following auto-expanding fields:
C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage.
plant_hydraulic_head Hydraulic head at power station.
plant_turbines Number of turbines, with respective rated capacity. Exclude any reversible turbine-generators (pump/generators) and pumps from this — it should only contain conventional generation-only turbines.
plant_pumpgenerators Number of reversible turbine-generators (pump/generators), with respective rated capacity. For pumped storage plants only.
plant_pumps Number of pumps, with respective rated capacity. For pumped storage plants only.
plant_capacity Current installed capacity in megawatts, or planned capacity for those under development.
For plants which are operational, but have additional capacity under development, please use only the current installed capacity.
plant_capacity_factor Capacity factor of the power station, in percentage. For pumped storage, please try to rely solely on third-party sources, as manual capacity factor calculations are overly complex for PSH and their results do not align with figures in (authoritative) third-party sources.
plant_efficiency Overall efficiency of the power station, in percentage. Generally only applicable to pumped storage.
plant_storage_hours Storage capacity of the power station, in hours (if desired, you can also provide calculated or actual GWh figures in parenthesis). Generally only applicable to pumped storage.
plant_annual_gen Average annual power generation. To be used in combination with the following plant_annual_gen_year parameter. GW·h suffix will auto added for number without unit or any text appended.
plant_annual_gen_year Given generation value exact description. If no description is given, it will default to Annual (i.e. it will expand to Annual generation). Enter following text:

Planned net if given data is a planned estimate net output
Planned gross if given data is a planned estimate gross output
YYYY net, if given data is year YYYY net output
YYYY gross if given data is year YYYY gross output
Annual net if given data is a average net output
Annual gross if given data is a average gross output

website Raw wikitext for entering website(s). Use [brackets] where appropriate
extras Free form, spans both columns. Use sparingly.

Coordinates[සංස්කරණය]

The coordinates should be specified using coordinates – with a {{coord}} template. See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.

Microformat[සංස්කරණය]

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates[සංස්කරණය]

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes[සංස්කරණය]

hCard uses HTML classes including:

  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • uid
  • url
  • vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

  • geo
  • latitude
  • longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision[සංස්කරණය]

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

Tracking category[සංස්කරණය]

See also[සංස්කරණය]

TemplateData[සංස්කරණය]


"https://si.wikipedia.org/w/index.php?title=සැකිල්ල:තොරතුරුකොටුව_වේල්ල/ලේඛය&oldid=457020" වෙතින් සම්ප්‍රවේශනය කෙරිණි